Home| Brill Armory / BSI IC-2000 Rubber Toughened CA Glue 1oz

Manufactured by: Bob Smith Industries

Brill Armory / BSI IC-2000 Rubber Toughened CA Glue 1oz

Manufactured by: Bob Smith Industries

Brill Armory / BSI IC-2000 Rubber Toughened CA Glue 1oz

Weight: 0.1 lb

Model: BSI-118

$12.00
$12.00
Sale
9
In Stock
product details

Regular CA glues can crack and shatter, leaving residue in the gearbox. Brill Armory recommends this rubber-toughened CA glue for piston racks, as it is reinforced and shock resistant. The setup time of 20-40 seconds is also longer than instant CA adhesives, giving the technician more time to fully tap the rack back in.


IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R/C car tires.

IC-2000™ has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available.

Works Best On:

- Glass & Metal
- Fiberglass
- Hard Plastics
- Rubber
- Reinforcing

Works Good On:

- Balsa Wood
- Soft Wood
- Hard Wood
- Ceramics
- Laminating
- Water-Resistant

Directions:

Screw on top and cap unit to puncture the seal on the tube Remove cap and apply IC-2000™ CA to one side of the parts being joined, then hold them tightly together for 10-25 seconds for shock resistant joints. For larger bonding areas, apply serpentine beads of the CA, allowing for the spreading of the adhesive. For maximum flexibility, do not use with an accelerator. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 250º F. Top and tip can be soaked in acetone for cleaning.

WARNING: BONDS SKIN IN SECONDS, EYE AND RESPIRATORY IRRITANT

View the manufacturers page for safety information.

 

product details

Regular CA glues can crack and shatter, leaving residue in the gearbox. Brill Armory recommends this rubber-toughened CA glue for piston racks, as it is reinforced and shock resistant. The setup time of 20-40 seconds is also longer than instant CA adhesives, giving the technician more time to fully tap the rack back in.


IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R/C car tires.

IC-2000™ has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available.

Works Best On:

- Glass & Metal
- Fiberglass
- Hard Plastics
- Rubber
- Reinforcing

Works Good On:

- Balsa Wood
- Soft Wood
- Hard Wood
- Ceramics
- Laminating
- Water-Resistant

Directions:

Screw on top and cap unit to puncture the seal on the tube Remove cap and apply IC-2000™ CA to one side of the parts being joined, then hold them tightly together for 10-25 seconds for shock resistant joints. For larger bonding areas, apply serpentine beads of the CA, allowing for the spreading of the adhesive. For maximum flexibility, do not use with an accelerator. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 250º F. Top and tip can be soaked in acetone for cleaning.

WARNING: BONDS SKIN IN SECONDS, EYE AND RESPIRATORY IRRITANT

View the manufacturers page for safety information.

 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

manufacturers

ACETECHAction ArmyActionSportGa...Airsoft Innov...Airsoft MutationAirsoft PartsAlphaWireAztech Innova...BB BastardBioshotBlackTalon Co...BRILL ARMORYCHEMIS CYMADKT BrandDream ArmyEagle6 AirsoftEcho 1ElementElite ForceEmei Landarms...EPeS Airsoft Field Limit T...FPS SoftairGATE ElectronicsGuarderGungineer Air...JefftronLambda AirsoftLaylaxLCTLonexMaekiiiMaple Airsoft...ModifyNorthern Hurr...PDIPerun AirsoftPolarStar Air...PPSProfessional ...ProWinRetro ARMSRocket AirsoftSapporo Preci...ScatterplotSHSSiegetek Conc...SlongSolinkSparkLabsSpring-TekSuper LubeSuper ShooterT238TruSight Airs...W.S. Deans Co.Warhead Indus...XcortechZCI