Manufactured by: ZCI

ZCI Pinion Pull & Press Tool

Manufactured by: ZCI

ZCI Pinion Pull & Press Tool

Weight: 0.86 lb

Model: M-147

Regular price $23.00
$23.00 Sale price Regular price
Sale
Out of stock
product details

This tool can remove and install O-type pinion gears!

Installing a pinion gear that is too tight can damage the motor or tool, so it's crucial to install pinion gears carefully.

Some pinion gears may need to be thermally expanded with a heat gun to ease installation. Lubricating oil is also recommended for installation.

If installation of the pinion gear remains difficult, it may be necessary to remove some material from the armature. This can be done by securely fastening the motor to a vice and running it at very low voltage with the motor tower and pinion gear removed. While the shaft is in motion, carefully apply sandpaper to remove material. It is crucial to remove material in small increments, as excessive removal can result in an overly loose pinion fit.

product details

This tool can remove and install O-type pinion gears!

Installing a pinion gear that is too tight can damage the motor or tool, so it's crucial to install pinion gears carefully.

Some pinion gears may need to be thermally expanded with a heat gun to ease installation. Lubricating oil is also recommended for installation.

If installation of the pinion gear remains difficult, it may be necessary to remove some material from the armature. This can be done by securely fastening the motor to a vice and running it at very low voltage with the motor tower and pinion gear removed. While the shaft is in motion, carefully apply sandpaper to remove material. It is crucial to remove material in small increments, as excessive removal can result in an overly loose pinion fit.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
A.K.

Amazing tool if you need to ever remove a pinion. Even heating up the pinion with a butane torch, I still cannot remove it on numerous motors. This makes swapping out stripped pinions such a breeze! If you don't know how to use one, there are many videos if you google it, it's really simple!

R
R.K.

Just what I needed. I 2 16TPA ASG motors with broken pinions and a few others with pinions that did not mesh well. This tool saved me a lot of money. This tutorial helped out a lot https://www.youtube.com/watch?v=PTEE-YoH5Xw. In addition to that, I recommend using a thick o ring around the motor to help out with centering it since strong magnets can make that difficult.